How to Properly Lubricate Your Garage Door

How to Properly Lubricate Your Garage Door

Do you wish to know how to lubricate a garage door properly? This is something which isn't very difficult but can be a daunting task, if not impossible, to do on your own. There are a few things you need to know to help you through the process. So we will discuss the process in this article. Read on.

Find out how old your garage door is

The first thing you need to consider is how old your garage door is. If you live in an older home or are building a new one, it's a good idea to find out the age of the door. If it is more than ten years old, you will need to find out the manufacturing date.

Why go through the stress of finding how old your garage door is? This is worth knowing because you're better off purchasing a new garage door when you start experiencing problems. Older garage doors tend to get faulty a lot of times, and lubricating your door won't make it all better.

Lift the door

It's a good idea to get someone strong enough to lift the door for you. Before the door is lifted, ensure you disconnect the garage door opener from a power source. This will prevent the door from starting accidentally. Avoid any injury as much as possible; this is an easy task.

Clean garage door

When you lift the door, make sure you clean every part of the door. It's essential to clean the door before lifting it up. However, raising it gives you access to vital places which also requires cleaning. Lubricating a dirty garage door is simply a waste of time; there is no way the lube oil will get to the needed place. That is why you want to make sure you check the door entirely and that there is no sign of dirt, debris or grime.

Find a suitable garage door lubricant.

Garage Adviser has an article on the best lubricants for garage doors, and you want to check that out. With so many options, it's simply not an easy thing to find the right lubricant for your door. This article explains all you need to know about the different options available.

Some lubricants may require you to use a grease gun, but this shouldn't be a problem because most options don't require them.

Apply lubricant to vital parts

Do this slowly, getting into the crevices as you go. Use a little of the lubricant that you bought along with the grease gun. Be careful not to coat the gun with too much, or it will burn. Also, if you use too much, you won't be able to clean it thoroughly. Start from the back of the door and work forward, checking the back panel as you go.

To keep your job from being ruined, make sure you cover the excess as you work. You can also remove the door after you finish this part of the process. This will prevent any more of the grease from getting inside.

Next, you will need to lubricate the door's window and panel as well. Use a little of the lubricant and a rag. Then wipe the window and the panel with the cloth. Continue to this process, backing away and cleaning the panel each time.

Work slowly, backing away from the door a bit to avoid using too much, but you still need to work quickly to make sure that you do not damage the parts of the garage door.

When the door is completely dry, you will need to open it up and check the area where the door was. Make sure you do this carefully, working at the door from both sides. If you leave any areas of the door dry, you may also find that the door gets trapped in the crevices. This could cause it to collapse and not open again.


Lubricating your garage door is not a one-time task. You need to make it a routine to lubricate your door at least every 6 months. This is an essential step in ensuring your garage door works at it should, and to avoid any unforeseen breakdown of the door.

Rate this article
related post
No Comments
leave a comment